Country Selection

Please select the country where your order will be shipped to.



FiberBow 6.9 riser
Further Information
FiberBow

FiberBow 6.9

The FiberBow 6.9 (DRIZ) is the new standard model in the FiberBow range. Slightly heavier at 650g but still incredibly light weight. As with the TX model the standard model also features the long awaited limb alignment system. Accepts all ILF fitting limbs.

The DRIZ technology stands for Double Reinforced Impact Zones which improves torsional stiffness.

  • Colour: Black matt carbon
  • Carbon UD meshes on "empty balloon" technology for maximum lightness
  • 1/2in Deflex profile for improved stability
  • 650g approx. total mass weight
  • Aluminum Black anodized 7075 limb bolts
  • Limbs alignment system on both pockets, by 7075 aluminum align plates
  • Black 3D Printed plastic grip with Medium / Flat profile
  • Supplied with riser fabric sleeve RS-01 and full set of Allen wrenches
  • Available in RH and LH models

Optional Accessories:

  • SSB - Stainless Steel limbs Bolt
  • ALB - Brass align Plates
  • Several models of Grips (currently in development)*

FiberBow 6.9 riser
FiberBow 6.9 - Limbs Alignment System
Information provided courtesy of FiberBow.

Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.


/FB69