Country Selection

Please select the country where your order will be shipped to.



Further Information
CT
Carbon Tech McKinney II (2015)

Carbon Tech McKinney II (2015)

Bright new look with refreshed graphics for 2015.

The revolutionary McKinney II shaft allows archers to reach 90 meters with less draw weight than ever before!

This extremely fast new arrow will give you speed beyond your wildest dreams. With speed comes flat trajectory and flat trajectory allows less wind drift. Rick McKinney spent over three years working on the materials, specific wraps of carbon, and the precision required to satisfy archers who want ultra-precise products. The super high tech, space-age carbon used in each shaft allows for the lightness with extreme exactness.

The McKinney II shafts are the most precise arrow shafts made today.

This shaft is definitely aimed at the serious top-level competition archer, offering a very closely matched (for both weight and spine) set of 12 shafts, with a price tag to match the performance of such a high quality shaft.

All Carbon Tech McKinney II shafts accept the ACE range of internal fitting components such as

  • Beiter 12 series insert nocks
  • Easton G nocks
  • Easton ACE Break-Off points*
  • Easton ACE Screw-In Points & Inserts

*For 450 and 500 sizes only we recommend using Easton ACG points and if you want to use a pin nock system then select the Easton ACG Pins as these components have a lightly wider outside diameter suitable for these larger size shafts.

The Carbon Tech McKinney II is a lightweight shaft, weighing in at just under the equivalent ACE, ensuring high speed and a low trajectory to the target.


Assembly Guidelines

We recommend Rick’s Glue for the points. This 48-hour epoxy gives the shaft better frequency absorption. Just remember to let the glue cure for the full 48 hours or you will lose points. For the pin system, you can use low temperature hot melt. This glue has similar absorption capabilities as Rick’s Glue but does not adhere as strongly. We do feel that super glues do not work as well due to the crystallization of the glue after a short period of time. Never use glues with Beiter nocks—most glues will attack the plastic and cause the nocks to deform and even break or crack. Use Teflon tape instead. This lubricity tape keeps the nock secure yet allows you to twist the nock into place.

Carbon Tech McKinney II (2015)

CT McKinney II (2015) Spines, Lengths & Weights

SpineFactory
Length
Grains
per inch
45032"6.5
50032"6.1
55032"5.7
60031"5.4
65031"5.1
72530"4.8
85030"4.5
*Factory lengths subject to availability

Carbon Tech - Target Arrow Chart

MK = McKinney II, CH = Cheetah, H = Hippo
 Bow 
 Weight
   24"
25"
26"
27"
28"
29"
30"
31"
32"
15-25
MK 1050
CH 650
CH 25/50
MK 950
CH 650
CH 25/50
MK 850
CH 650
CH 25/50
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
25-30
MK 1050
CH 650
CH 25/50
MK 950
CH 650
CH 25/50
MK 850
CH 650
CH 25/50
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
30-35
MK 1050
CH 650
CH 25/50
MK 950
CH 650
CH 25/50
MK 850
CH 650
CH 25/50
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
35-40
MK 1050
CH 650
CH 25/50
MK 950
CH 650
CH 25/50
MK 850
CH 650
CH 25/50
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
40-45
MK 1050
CH 650
CH 25/50
MK 950
CH 650
CH 25/50
MK 850
CH 650
CH 25/50
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
45-50
MK 950
CH 650
CH 25/50
MK 850
CH 650
CH 25/50
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
50-55
MK 850
CH 650
CH 25/50
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
CH 400
CH 45/70
H 400
55-60
MK 725
CH 650
CH 25/50
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
CH 400
CH 45/70
H 400
CH 300
CH 55/80
60-65
MK 650
CH 650
CH 25/50
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
CH 400
CH 45/70
H 400
CH 300
CH 55/80
CH 300
CH 55/80
65-70
MK 600
CH 650
CH 25/50
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
CH 400
CH 45/70
H 400
CH 300
CH 55/80
CH 300
CH 55/80
CH 300
CH 55/80
70-75
MK 550
CH 525
CH 35/60
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
CH 400
CH 45/70
H 400
CH 300
CH 55/80
CH 300
CH 55/80
CH 300
CH 55/80
*
75-80
MK 500
CH 525
CH 35/60
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
CH 400
CH 45/70
H 400
CH 300
CH 55/80
CH 300
CH 55/80
CH 300
CH 55/80
*
*
80-85
MK 450
CH 400
CH 45/70
H 400
MK 450
CH 400
CH 45/70
H 400
CH 400
CH 45/70
H 400
CH 300
CH 55/80
CH 300
CH 55/80
CH 300
CH 55/80
*
*
*
/CTMCK15