Country Selection
Please select the country where your order will be shipped to.
Easton ACG shafts
The pinnacle of parallel shaft performance.
Advanced engineering combines with a sleek, parallel profile to deliver tournament gold with the Easton A/C/G. A/C/G is built on the precision Alloy/Carbon foundation to give archers long-range grouping advantage in the parallel shaft category.
Aluminum/Carbon/Gold starts with a precision-drawn alloy core tube and adds specialized carbon overlays that use the same construction basis as all Easton A/C arrow models. Purpose-built for tournament and training use, A/C/G offers superior durability, low wind drift and consistent down range grouping.
A/C/G arrows fly true, group tight, and win big. Choose small diameter Easton A/C/G for superior performance to take your game to a new level.
Features:
- Slim, parallel profile.
- High-Strength carbon fiber bonded to a 7075 aerospace alloy core tube.
- Polished black carbon finish.
- Guaranteed straightness: +/- .002"
- Weight tolerance: +/- 1.0 grains
- Available sizes: 430.480.540.610.660.710.810.880.1000.1150.1300.1500
- Components sold separately
Components:
- Points:
- ACE One Piece 50gr (fits 610-1500 sizes)
- ACE Break-Off 60-70-80gr, 80-90-100gr, 100-110-120gr (fits 610-1500 sizes)
- ACG Break-Off 70-80-90gr, 100-110-120gr (fits 430, 480 and 540 sizes)
- Insert Nocks:
- Easton G Nocks
- Pin Nocks:
- ACE Pin (fits 610-1500 sizes)
- ACG Pin (fits 430, 480 and 540 sizes)
- ACE and ACG Pins accept both Easton Pin Nock and Easton G Pin Nock options.
Listed below are the official Easton Model Specifications for ACE shafts and their accessories...
| Shaft Model | ACG |
| Materials/Construction | Carbon fibre bonded to a 7075 core tube |
| Nock System | Insert or Pin |
| Nock Type | G nock or ACE Pin Nock |
| Weight Tolerance | +/- 1.0 grains within matched dozen |
| Straightness | +/- .002" (.004" TIR) |
| Colour | Polished Black Carbon |
| Shaft Size | Shaft Weight (gns/inch) | Spine @ 28" span (inches) | Shaft OD (inches) | Stock Shaft Length (inches) | Rec'd Point Weight (grains) |
|---|---|---|---|---|---|
| 1500 | 4.7 | 1.500 | .201 | 28 | 50-70 |
| 1300 | 5.1 | 1.300 | .204 | 28.5 | 50-70 |
| 1150 | 5.5 | 1.150 | .208 | 28.5 | 50-70 |
| 1000 | 5.5 | 1.000 | .204 | 29 | 70-80 |
| 880 | 5.9 | 0.880 | .207 | 29.5 | 70-80 |
| 810 | 6.1 | 0.810 | .209 | 30 | 80-90 |
| 710 | 6.5 | 0.710 | .213 | 30.5 | 80-90 |
| 660 | 6.9 | 0.660 | .215 | 30.75 | 80-90 |
| 610 | 7.3 | 0.610 | .218 | 31 | 80-90 |
| 540 | 7.7 | 0.540 | .221 | 31.5 | 100 |
| 480 | 8.4 | 0.480 | .226 | 32 | 100-110 |
| 430 | 8.9 | 0.430 | .229 | 32.5 | 100-110 |