Country Selection

Please select the country where your order will be shipped to.

Further Information
by Bernardini

Nilo 25in

The Nilo is a 25 inch anodized machined aluminium riser. It is supplied with a medium wood grip and adjustable limb pockets (10%).

A 4 piece weight kit is available separately for simple barebow conversion.

  • 25" riser
  • Designed for both Olympic and Barebow archery
  • Machined from a single block of aluminium
  • Mass weight: 1.220kg
  • Medium Wood Grip supplied
  • Adjustable limb pockets (10%)
  • Accepts all International Fitting limbs
  • Available in LH and RH models
  • Standard colours:
    • Natural
    • Black
    • Blue / Gray
    • Red
    • Blue
    • Orange

Other colours such as Grey, Violet, Green, Yellow, Bronze and Gold are available on a special order basis and higher price. Click here for Base Model or Weights Model...

Bernardini Nilo 25in weights

Bernardini Grips - Low, Medium, High
Low, Medium and High Wood Grips are also available separately.

Bernardini Nilo 25in - Blue Gray
Bernardini Nilo 25in - Blue Gray
Bernardini Nilo 25in - Blue Gray

Bernardini Nilo 25in - Blue Gray

Information supplied by Bernardini Archery

Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.