Country Selection

As with all Beiter products, the Centralizer was tested by top archers world-wide and used successfully in competitions.

Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made from high quality thermoplastics and elastomers: the result is a new concept of stabilisation. Tests have shown that the system is able to absorb more vibration, so giving the archer less problems while aiming and performing the shot.

The distance between tuners (2 to 5) can be individually chosen, as can the length of the Centralizer (from 26 to 54 inches) with the option of having an Endcap or a Weightadapter at its end. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation. However, if you don't feel comfortable with the stabiliser you have tried, switch to a longer one with, possibly, more tuners. The popular tendency is to shoot with longer rods, with 3 or 4 tuners, with no weight in front.

We would normally stock the 30" Standard BLUE coloured model which includes 3 tuner slides plus end weight adapater. Although from time to time, various specifications are available in store.

All listed sizes and options are readily available to special order direct from the Beiter factory!

This stabilizer can be used with additional end weights.
We have found in practice, that only the smallest amount of weight is required and possibly the results are better with no weights at all.
You may find that removing one of the tuners will make it easier to tune.
As Beiter do not produce their own weights, we recommend using the Cartel Weights.

The full range of spare parts and accessories for the Centralizer are generally available in store. Check out the Stabilizers > Accessories section for further information.

ORDER NOTE:
- Thread Length: This refers to the LENGTH of the thread.