Country Selection

Please select the country where your order will be shipped to.

Further Information
Mybo Certo Short Rods

Mybo Certo Short Rod:

Not all stabilisers are created equally.

The Certo and Aeris stabilisers are how all stabilisers should be made – For tournament archers, competing in real world shooting conditions.


  • 20mm, high rigidity carbon shaft
  • Solid aluminium mounting bushings
  • Silicone damper unit (included)
  • Solid Steel weights (included)
  • Adjustable mounting thread to ensure graphics are always the right way up!


  • Black
  • Blue
  • Orange
  • Red

Size / Weight:

  • 8in - 93g / 3.3ox
  • 10in - 103g / 3.6oz
  • 12in - 108g / 3.8oz
  • 15in - 119g / 4.2oz



Q – Are they designed for recurve or compound bows?
A – Both. There is no difference between a reurve or compound stabiliser.

Q - What is the difference between the CERTO and AERIS?
A – The shaft.

The CERTO features a pure carbon, 100% unidirectional shaft for maximum possible rigidity. (22% stiffer than Aeris. 50% stiffer than some other leading brands). The CERTO shaft is approximatly 12% lighter than the AERIS shaft.

The AREIS features a dual core carbon shaft. 1 x 1mm 100% pure carbon, unidirectional layer. 1 x 1mm carbon mix layer.

Q - What is the difference between the dampers?
A - Flexibility.

The standard 25mm damper is suitable for most applications and can hold up to 4 steel weights.

The 40mm damper is recommended only for 1 steel weight.


A stabiliser is all too often relegated to last place when budgeting for equipment. The simple fact is that stabilisers can have a dramatic effect on how a bow performs. Maybe not in a laboratory, or in a shooting machine. But in the human world, the less than perfect “oops, I didn’t mean to do that” world of real shooting. In tense, difficult conditions, the right stabiliser set up can save your score.

If we all shot perfect shots, every time, stabilisers wouldn’t matter. But since we are not all shooting machines, stabilisers should be given every bit as much consideration as the bow you are fitting them to.

There are two primary functions of a stabiliser, and one secondary function.


  • Improve Forgiveness
  • Improve Aim


  • Control Vibration.

    Improve Forgiveness

    This is one of the primary functions of a stabiliser. When a shot is executed, the bow should remain as stable as possible while the arrow is pushed through the bow. When a bow is drawn, all sorts of uneven pressures are built up in the bow. At the moment of loose, all of these pressures are released, all wanting to push the bow in different directions.

    If this movement was exactly the same each time, as if shot from a machine, it could be argued that it wouldn’t affect accuracy.

    But since some of these pressures that build up are generated from your contact with the bow (e.g. grip contact, string contact) they are not the same every time. In fact, they can be drastically different! (e.g. a bad loose). This is where the word ‘forgiveness’ comes into the equation.

    The act of suspending weights at a distance away from the bow makes it harder for these forces to move the bow off line. The greater the weight, the more forgiving the bow becomes.

    If you are a follower of archery trends, you will have noticed in recent years how the best archers are using more and more weight on their stabilisers. Unfortunately, many stabilisers currently on the market can not handle this weight. If the shaft of the stabiliser is too weak (too flexible) the effect of the added weight is neutralised due to the whip of the rod.

    The CERTO and AERIS stabiliser feature ultra stiff carbon shafts that can accommodate heavy weights if so desired. The CERTO rod in particular features a 100% unidirectional, pure carbon shaft for the maximum possible rigidity.

    Improve Aim

    It should be obvious, even to the uninitiated, that a perfectly balanced bow will aim steadier. Some bows, even without stabilisers, can be surprisingly well balanced. But rarely could a naked bow be called perfect. Since the way a bow is balanced is most critical at full draw, it is hard to measure exactly where the balance point should be. It will certainly be different from the braced position. Therefore experimentation of weights between front and rear/side rods will affect your aim and is a key part of the tuning process.

    As to how much weight is used? This can be quite a subjective and individual aspect to stabilisation. Generally, a heavy weight load out will ‘slow’ your aim. A lighter load out will be more responsive. E.g. if you drift out of the gold with a light set up, you can return more quickly to the centre. This might sound good, but you probably drifted further out than you would have done with a heavy load out in the first place…

    Also, consider how your aim responds in different situations. E.g. What happens when you are nervous? Or on a windy day? Your optimal indoor set up could be different to your optimal outdoor set up.

    On balance, we feel that advantages of heavier weight load outs out way the disadvantages. With one exception - Physical strength. If you over do the weight, and you do not have the physical conditioning to cope with it, your technique will suffer and your scores will drop. Technique is king! Never compromise!

    So be sure to select a stabiiser that can accomodate heavy weights should you desire to experiment.

    Control Vibration

    The secondary function of a good stabiliser is vibration control. We regularly see stabiliser tests with heavy emphasis on vibration dissipation. You know the ones - Those frequency charts that look like they are measuring seismic activity. It seems this function of a stabiliser is being given disproportionate attention. The fact is that bow design today has progressed immensely from bows of 5 years ago. They are inherently low vibration pieces of equipment. So while we don’t want to marginalise the importance of vibration control, in regards to stabilisation, it is a secondary function.

    So although we feel vibration control is a secondary function, we still wanted to design the BEST damper unit of any stabiliser on the market! We shortened and widened the damper, so it could work effectively with heavier end weights, and experimented with different materials. We added free floating harmonic steel rings mounted around silicone to further enhance the vibration absorbing qualities. The result is a unique, effective silicone damper system. And we have included it as standard!


    Taking all of the above into consideration, we beleive we have created the most effective stabiliser system on the market today.

    We hope you agree.

  • Information provided courtesy of Mybo