Please select the country where your order will be shipped to.
The Easton ACE was introduced to the competitive archery world many years ago, and it is still one of the lightest, most consistent target shafts ever created.
Unidirectional carbon fibres bonded to the precision-drawn, high strength aluminium core provide an extremely accurate and durable shaft. Easton's exclusive barrel-shape technology, introduced with the ACE, provides a lighter, stiffer shaft. The lighter ends create a higher natural frequency of vibration for better clearance.
Precision state-of-the-art manufacturing processes ensure each shaft is perfectly matched in weight and spine. ACEs provide field and target archers with superb performance.
We cannot guarantee specific "C" numbers for these shafts but if you ask for them then we will try and obtain them for you.
Easton ACE shafts should be sold only in matched dozens - as supplied by Easton. Beware of any dealer selling part sets or individual shafts.
Listed below are the official Easton Model Specifications for ACE shafts and their accessories...
|Materials/Construction||Carbon fibre bonded to a 7075 core tube|
|Nock System||Insert or Pin|
|Nock Type||G nock or ACE Pin Nock|
|Weight Tolerance||+/- 0.5 grains within matched dozen|
|Straightness||+/- .002" (.004" TIR)|
|Colour||Polished Black Carbon|
|Shaft Size||Spine @ 28" span (inches)||Shaft Weight (gns/inch)||Shaft OD (inches)||Stock Shaft Length (inches)||Rec'd Point Weight (grains)||Rec'd Insert + Point||Maximum Trim Amount (inches)|
|1250||1.250||5.0||.205||26 5/8||60||60/70/80||No limit|
|1100||1.100||5.1||.205||28 5/8||70||60/70/80||No limit|
|1000||1.000||5.7||.213||28 5/8||70||H2||No limit|
|850||0.850||5.7||.213||28 5/8||75||H3||No limit|
|780||0.780||6.0||.216||29 5/8||80||J2||No limit|
|670||0.670||5.9||.212||30 5/8||80||J2||No limit|
|620||0.620||6.1||.214||30 5/8||85||J3||No limit|
Weight - Due to the barrel design of the ACE, the weight is and average grains per inch of a 29in shaft. Shaft weight is slightly heavier in the larger diameter centre and lighter towards the tapered ends. One inch of shaft cut from the point end typically weighs 5-6 grains.
1100 and 1250 sizes are available as special order only from the factory. Replaced with the ACC -00 sizes.
OD - Nominal outside diameter at the mid point of shaft. Ends are smaller due to the barrel design.
Trim Amount - Recommended that no more than these lengths be cut from the front of the shaft.