Please select the country where your order will be shipped to.
SHORT - to give you more draw length, power stroke, and bow speed!
SWEET - because of it's ultra-sensitive feel and ultra-accurate performance!
The Short-N-Sweet S2 differs from the S1 model in that the trigger is swept back for a more comfortable feel.
The TRU Ball Short-N-Sweet is factory set to within 0.001" of it's suggested setting. To achieve the lightest setting on your own, turn the sensitivity adjustment screw in 1/4 turn increments until it misfires prematurely. At this point, back the set screw out until the release misfires at a pull of around 50lbs or greater (by holding the string in one hand and the pull the release away with the other - don't use your bow). At this point, back the screw out 1/4 turn and your release will be at it's lightest suggested setting.
To stiffen your release, continue to back the screw out until your reach your desired sensitivity.
IMPORTANT: Use blue Loc-Tite if the release is adjusted more than once.
To adjust the draw length of the release at the strap connector, you simply loosen the aluminium nut at below the strap connector, turn the aluminium micro-adjustment bolt in or out, and then re-tightening the nut.