Country Selection

Please select the country where your order will be shipped to.



Further Information

Beiter Pin V Bar

Designed to complete the Beiter Centralizer system.

The Beiter Centralizer is available with a 16mm (normal) or 28mm long thread for the Bowadapter. Use the 28mm long thread version if you want to fit the Beiter Pin V Bar directly onto the bow, Beiter Extender or Beiter Extender with Pins.

Bowadapter Threads:

  • 5-16/24 x 28mm,
  • M8x1 x 28mm or
  • M8 x 28mm

Accepts 5/16" thread short rods.

Pin V Bar Colours:

  • Black or
  • Silver

Pin V Bar Types:*

  • 90x0 degrees,
  • 90x17 degrees
  • 70x0 degrees
  • 70x17 degrees

*The 90 or 70 refers to the horizontal angle. The 0 or 17 refers to the vertical angle.

Advantages:

  • Direct and easy fixation of the Pin V Bar to the bow, the Beiter Extender or the Beiter Extender with Pins. NO EXTRA SCREWS ARE NEEDED!
  • You can fix the Pin V Bar on the bow with mounted Side Rods.
  • Together with the Extender with Pins, you will have a SECURE fixation on the bow - no more loose V Bar!
    [DO not use the Pin V Bar as a lever to tighten the system on to the bow - ONLY use it to position it correctly.]

Beiter Pin V Bar
Beiter Pin V Bar

Beiter Extender with Pins
Beiter Extender with Pins

Beiter V Bar attached to the Extender with Pins
Beiter V Bar attached to the Beiter Extender with Pins (4" std blue)


Please note some items featured here may not be in stock. However, we should normally be able to obtain any Beiter product within 7 days from the date of your order.

Information supplied courtesy of Beiter...
/BEITV