Country Selection

Please select the country where your order will be shipped to.



Hoyt Grand Prix Excel limbs - SALE
Further Information
Hoyt

Excel Limbs

Starter limbs do not come better than this. Hoyt’s Excel features a relaxed flex pattern for a wide range of dynamic performance and, like all Hoyt limbs, total dynamic alignment through the power stroke. If you are looking for true performance and total smoothness at an affordable price with HDS compatibility, Hoyt Excel is the best possible choice.

IMPORTANT NOTE. The specifications have changed from 2013. All sizes listed are now shown for a standard 25 inch riser.

  • Lengths: Short (66in), Medium (68in), Long (70in)
  • Poundages: 22lbs to 38lbs in 2lbs increments

Hoyt Excel limbs

Looking for Technical Support for your Hoyt bow?

Hoyt USA's official web site carries full technical information and product assistance for it's 1997 to present ranges of models - both recurve and compound!

Hoyt USA Technical Info...


Information provided courtesy of Hoyt

Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.


/HOYEXCL