Country Selection

Please select the country where your order will be shipped to.

Further Information
by Bernardini

Mamba 19in

Bernardini introduces the Mamba, a 19 inch recurve riser derived from their highly popular 21 inch Cobra model. The Mamba will accept all international fitting limbs and is suitable as a competition recurve bow and a hunting style bow.

  • 19 inch riser
  • Produced from 6082T aluminium
  • Produces bow lengths between 60in and 64in
  • Mass weight: 1.180kg
  • Fine wood grip side plates
  • Adjustable limb pockets
  • Accepts all International Fitting limbs
  • Available in LH and RH models
  • All the usual fixtures for button, rest, stabilizer, etc.
  • Weight kit included
  • Anodized riser colour:
    • Black
    • Gray
Bernardini Mamba

Information supplied by Bernardini Archery

Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.