Country Selection

Please select the country where your order will be shipped to.

Further Information
Stark Archery

Stark Real riser

The long wait is over! The Stark Real riser is now a reality! After almost two years development and several name changes, we finally have them in store!

From the people who brought you the Kaya range of products have launched the Nomad, Soul and Stark brands. The first riser from the Stark range is a stunner! Inspired by high speed and soft touch. This 25 inch 1190g die-casted, CNC finished aluminium riser is now available in RH model only in six colour options.

Features an easy to use limb alignment system and it will accept any international fitting limb (ILF) on the market.

  • Material: Aluminium
  • Die-casted aluminium with CNC finish
  • Riser Length: 25in
  • Weight: 1190g
  • ILF fitting
  • Recommended Brace Height: 216mm +/-10mm
  • Tiller / Draw Weight Adjustment: Maximum 2 turns from bottom

Painted Colours:

  • Black
  • Blue
  • Grey
  • Red
  • Silver*
  • White

* The factory changed the silver colour since the original images were forwarded to us. The new silver is shown below...

Stark Real riser
Stark Real riser - top limb pocket
Stark Real riser - black

Stark Real riser - blue

Stark Real riser - grey

Stark Real riser - red

Stark Real riser - silver

Stark Real riser - white
Information provided courtesy of Freddie Archery.

Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.