Country Selection

Please select the country where your order will be shipped to.

Further Information

Samick Ultra-X Riser

The Ultra-X is the ultra stylish top of the range 25in CNC machined aluminium riser from Samick. For the competitive archer the Ultra-X has stabilizer positions near the top and bottom limb pockets as well as the usual front mounting position. Weighing in at 1210g, the Ultra-X is available in RH and LH models in a range of anodized colours and painted white, and finished with a wooden grip.

Accepts all International fitting limbs.

  • Material: Aluminium CNC
  • Length: 25in
  • Model: RH and LH
  • Mass weight: 1210g
  • Supplied with wood grip
  • Anodized colours (except white)
  • Two positions for pressure button
  • 5/16in steel bushings for top, bottom and central mounting stabilizers
  • 6-32 clicker thread


  • Black
  • Blue
  • Green
  • Grey
  • Orange
  • Purple
  • Red
  • Painted White

Samick Ultra-X Riser - Grey


Samick Ultra-X Riser - Red


Samick Ultra-X Riser - Blue


Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.