Country Selection

Please select the country where your order will be shipped to.



Further Information
MK Korea

MK Alpha Riser

MK risers are not mass produced, each one is manufactured on a high quality CNC machine in Korea. We do not outsource our production to other countries. All in house manufacturing allows for strict quality control with minimal external conditions resulting in a perfect, blemish free riser each and every time.

MK Korea's combination of high quality aluminum and CNC machined parts results in a riser with minimal vibration and twisting for one of the truest and finest risers in the world.

Based on the archer's preference, ILF or F-series limbs can be interchangeable on the Alpha Riser without additional hardware.

MK Korea's damper system allows easier attachment of a damper on the riser or the F-series limbs and the grip was carefully designed to consider the variety of individual hand shapes to accommodate a solid and strong point while holding the riser. lt was the hope of the engineers to eliminate the need for additional or aftermarket grips to be purchased.

Technical specifications:

  • Length: 25in
  • Material: Aluminum 7075
  • Weight: 1130g
  • Type: RH / LH

Colours:

  • Black
  • Blue
  • Gold
  • Green
  • Grey
  • Orange
  • Pink
  • Red
  • Sky Blue
  • Violet
  • White

MK Alpha Riser

Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.


/MKALPHA