Country Selection

Please select the country where your order will be shipped to.



Soul Black Flash CF limbs
Further Information
Soul Archery
Soul Black Flash Carbon/Foam Limbs

Soul Black Flash Carbon/Foam Limbs

The Black Flash range has been expanded with the addition of a new carbon/foam model.

Bridging the gap between the Soul Everly and Soul Reverze limbs, Soul have introduced the new Soul Black Flash series. With their striking graphics and matt black colour scheme there are more than just a few echoes of the enormously popular Kaya K2 limbs.

Available in 66in, 68in and 70in lengths in poundages between 28-46lbs. International limb fitting (ILF). Made in Korea.

  • International Limb Fitting (ILF)
  • Materials: Carbon / Foam
  • Bow Lengths: 66in, 68in, 70in
  • Draw Weights: 28lbs to 46lbs in 2lbs increments
  • Made in Korea

 

The Black Flash range has been expanded to include Carbon/Wood and Carbon/Foam models. The graphics are identical. The only differences are the noticeable wood strips on the sides of the Carbon/Wood model and the completely black sides of the Carbon/Foam model. See picture below. Also the serial number label denotes either an "W" for the Carbon/Wood model and an "F" for the Carbon/Foam model.

Soul Black Flash and Black Flash Carbon/Foam Limbs

Soul Black Flash and Black Flash Carbon/Foam Limbs

Information provided courtesy of Freddie Archery.

Mix and Match Warning

The basic principle of International fitting limbs and risers is for all items, regardless of manufacturer, to be interchangeable. However, due to the re-design of certain manufacturers products this is no longer the case.

A particular case in point is the current range of Hoyt risers where the pivot point has now been moved back in line with the dovetail location. This pivot point on most other bows is on the leading edge of the pocket. This has resulted in some cases of poor fitting and non-alignment of limbs and in extreme cases even breakage due to the increased strain on the limbs.

All manufacturers will make their limbs and risers to specifically suit their own brand. Whilst most limbs and risers from all manufacturers will fit together, there are subtle differences in tolerances and the way they locate. Some use the end of the limb pocket as the pivot whilst other use the Dovetail location. Some rate their limbs at lowest limb adjustment, some for mid position. These are just two examples.

On this basis you can still "mix and match" limbs and risers from different manufacturers, but we are advising caution.


/SOULBFCF